Improved Reversible Zinc Storage Achieved in a Constitutionally Crystalline-Stable Mn(VO3)2 Nanobelts Cathode

Rechargeable zinc-ion batteries (ZIBs) are potential for grid-scale applications owing to their safety, low price, and available sources. The development of ZIBs cathode with high specific capacity, wide operating voltage window and stable cyclability is urgently needed in next-generation commercial batteries. Herein, we report a structurally crystalline-stable Mn(VO₃)₂ nanobelts cathode for ZIBs prepared via a facile hydrothermal method. The as-synthesized Mn(VO₃)₂ exhibited high specific capacity of 350 mAh g⁻¹ at 0.1 A g⁻¹, and maintained a capacity retention of 92 % after 10,000 cycles at 2 A g⁻¹. It also showed good rate performance and obtained a reversible capacity of up to 200 mAh g⁻¹ after 600 cycles at 0.2 A g⁻¹ under −20 °C. The electrochemical tests suggest that Mn(VO₃)₂ nanobelts impart fast Zn²⁺ ions migration, and the introduction of manganese atoms help make the structures more indestructible, leading to a good rate performance and prolonged cycle lifespan.     

Stabilized Nonconforming Mixed Finite Element Method for Linear Elasticity on Rectangular or Cubic Meshes

Based on the primal mixed variational formulation, a stabilized nonconforming mixed finite element method is proposed for the linear elasticity on rectangular and cubic meshes. Two kinds of penalty terms are introduced in the stabilized mixed formulation, which are the jump penalty term for the displacement and the divergence penalty term for the stress. We use the classical nonconforming rectangular and cubic elements for the displacement and the discontinuous piecewise polynomial space for the stress, where the discrete space for stress are carefully chosen to guarantee the well-posedness of discrete formulation. The stabilized mixed method is locking-free. The optimal convergence order is derived in the $L^2$-norm for stress and in the broken $H^1$-norm and $L^2$-norm for displacement. A numerical test is carried out to verify the optimal convergence of the stabilized method.     

石英晶体板非线性高频振动的拓展伽辽金法分析

针对考虑几何和材料非线性的石英晶体板厚度剪切振动和弯曲振动的方程组,利用扩展伽辽金法对该方程组进行转化和求解,分别获得了强烈耦合的厚度剪切振动模态和弯曲振动模态的频率响应关系,绘制了不同振幅比和不同驱动电压影响下的频率响应曲线图。数值计算结果表明可以选取石英晶片的最佳长厚比尺寸来避免两种模态的强烈耦合。驱动电压的变化将引起石英晶体谐振器厚度剪切振动频率的明显改变,必须将振动频率的漂移值控制在常用压电声波器件的允许值之内。扩展伽辽金法对石英晶体板非线性振动方程组的求解为非线性有限元分析和偏场效应分析奠定了基础。     

Computation of hydrodynamic mass and damping coefficients for a cavitating marine propeller flow using a panel method

The present paper deals with the numerical calculation of hydrodynamic mass and damping coefficients under consideration of unsteady sheet cavitation on marine propeller flows. In the first part of the paper, the mathematical and numerical background behind the numerical method is introduced. The numerical calculations carried out in this work are based on a low-order panel method. Panel methods belong to the class of collocation techniques and are applied to obtain a numerical solution of a potential flow based system of boundary integral equations. They are suitable for the present application because of their short computation time which makes them applicable in the design process of marine propellers.Additionally, two different approaches for the determination of hydrodynamic masses and damping are introduced in this work. The hydrodynamic masses and damping are important in studies of the ship motion in seaway and in the analysis of vibrations of a vessel and its appendages. The developed approaches are applied on a propeller flow in heave motion. Hereby, the calculations are performed for a non-rotating and rotating propeller under non-cavitating and cavitating conditions. The results obtained from the simulations are discussed in detail and an outlook is given.     

pH控制硫酸锰骨架的演化及其晶体结构

在DMF/H2O/CH3OH的混合体系中,反应温度为170℃,Mn SO4·4H2O盐溶液在p H=5和7的条件下,加热72小时,最终得到了结构不同的硫酸锰骨架[Mn2(SO4)3]·(H3O)2(1)和[Mn3(SO4)2(OH)2(H2O)2](2)。化合物结构通过单晶X-射线和红外光谱所表征,相应的晶胞参数:化合物1,立方晶系,空间群:P213,a=10.2009(12),V=1061.49(37)3,Goo F=1.158,Flack parameter 0.02(2),R1=0.0186(I2sigma);化合物2,四方晶系,空间群:Pbcm,a=7.3214(15),b=9.984(2),c=13.291(3),V=971.5(4)3,Goo F=1.063,R1=0.0227(I2sigma);单晶X射线分析显示化合物1是一个三维单手性硫酸锰骨架,化合物2是一个非手性羟基硫酸锰骨架。实验结果说明,p H值对硫酸锰骨架的改变起重要作用。     

Impact of tetrahedralization on parallel conforming octree mesh generation

This work discusses the performance impact from the tetrahedralization of non‐conforming meshes generated by a parallel octree method capable of handling arbitrary immersed geometries. First, we review conforming techniques for meshes created from octrees. Then we implement a tetrahedralization scheme based on templates in a parallel meshing algorithm that uses a linear octree with 2:1 balancing constraint. Besides, we also propose a change on the partitioning strategy for the same meshing algorithm to improve the octree refinement load balancing. Scalability analyses show that the chosen tetrahedralization technique preserves algorithm performance. Copyright © 2014 John Wiley & Sons, Ltd.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.     

Numerical simulation of transpiration cooling through porous material

Transpiration cooling using ceramic matrix composite materials is an innovative concept for cooling rocket thrust chambers. The coolant (air) is driven through the porous material by a pressure difference between the coolant reservoir and the turbulent hot gas flow. The effectiveness of such cooling strategies relies on a proper choice of the involved process parameters such as injection pressure, blowing ratios, and material structure parameters, to name only a few. In view of the limited experimental access to the subtle processes occurring at the interface between hot gas flow and porous medium, reliable and accurate simulations become an increasingly important design tool. In order to facilitate such numerical simulations for a carbon/carbon material mounted in the side wall of a hot gas channel that are able to capture a spatially varying interplay between the hot gas flow and the coolant at the interface, we formulate a model for the porous medium flow of Darcy–Forchheimer type. A finite‐element solver for the corresponding porous medium flow is presented and coupled with a finite‐volume solver for the compressible Reynolds‐averaged Navier–Stokes equations. The two‐dimensional and three‐dimensional results at Mach number Ma = 0.5 and hot gas temperature T_HG=540 K for different blowing ratios are compared with experimental data. Copyright © 2014 John Wiley & Sons, Ltd.     

Bistable characteristics of thick-walled axisymmetric domes

We apply a finite element analysis to examine the stability of spherical, thick-walled domes undergoing large deformation. We identify three energetic states, mono-stable, bi-stable, and pseudo-bi-stable that uniquely characterize the behavior of the dome during deformation. An empirical relation is developed using finite element simulations relating the stability of the dome to pertinent geometric parameters like height, length and thickness, which is verified experimentally. Using this relation, similar domes can be designed to have desired stability characteristics.     

A Spray‐Based Technique for the Production of MnS Thin Films

A spray‐based technique, originally developed for the production of semiconductor nanocrystals, is utilized for the preparation of high‐quality nanocrystalline thin films, as demonstrated with manganese sulfide. The films are formed by the use of pneumatic‐assisted thermospray or pneumatic nebulizers. Our simple, low‐cost, and low‐temperature process results in a dense and phase‐pure grain structure. The concepts and benefits of this technique are described and discussed. The film characteristics show dependence on the experimental parameters, in particular the rate of solvent vaporization. Three alternative film formation mechanisms are suggested for cases with varied experimental conditions.